Fire-Lite B300-6 6″ Base, Standard Flanged Low-Profile Mounting Base, White (Replacement For B210LP)

The B300-6 is a white, 6” base, standard flanged low-profile Detector mounting base; replacement for B210LP.

The B300-6 and B300-6-IV are plug-in detector bases intended for use in an intelligent system, with screw terminals provided for power (+ and –), and remote annunciator connections. Communication takes place over the power lines (+ and –).

This detector base mounts directly to 4-inch square (with and without plaster rings), 4-inch octagon, 31 /2-inch octagon, and single gang junction boxes. To mount, remove the decorative ring by turning it in either direction to unhook the snaps, then separate the ring from the base. Install the base on the box using the screws supplied with the junction box and the appropriate mounting slots in the base.

Place the decorative trim ring on the base and rotate it in either direction until it snaps into place.